February 14, 2019

How to Install Official Firmware on Lenovo K6 Power [k33]?

The official firmware file for Lenovo K6 Power is here. In this article, you will know how to Install stock ROM/flash file on Lenovo K6 Power. I have given a complete and Step by Step guide to Install Stock Firmware on Lenovo K6 Power.

How to Install Official Firmware on Lenovo K6 Power [k33]?

Benefits of Flashing Stock Firmware On Lenovo K6 Power:

Here I am listing few important benefits of flashing Stock Rom on Lenovo k6 Power:

  1. Downgrade Lenovo K6 power from Nougat to Marshmallow android version.
  2. Unbrick Lenovo K6 power by flashing stock firmware.
  3. Fix software related issues on Lenovo K6 Power Smartphone.
  4. Flash Lenovo k6 Power & fix Lenovo k6 Power stuck on boot-logo.
  5. Delete or remove pattern lock, pin lock on Lenovo K6 power.
  6. Unroot Lenovo K6 power to get back phone warranty, etc.

How To Flash Lenovo K6 Power?

In order to flash Lenovo k6 power, you have to download Lenovo k6 power firmware and Lenovo K6 power flash tool.
For more, you may watch Lenovo k6 Power stock ROM flashing Video:

Requirements To Flash Lenovo K6 Power Using QFIL Flash Tool:

  1. Charge your device to 80%.
  2. Take backup of your device if possible. Flashing process will format all user data and phone data.
  3. A working USB cable.
  4. Confirm your USB port is working properly.

Download Section:

Lenovo K6 Power Stock ROM/ FirmwareDownload
Lenovo K6 Power Flash Tool [QFIL]Download
Lenovo K6 Power USB DriversDownload

How to flash:

  1. First off all, Download and Install Lenovo K6 power USB drivers on pc. [If already installed, skip the step].
  2. Extract the downloaded "Qualcomm_Flash_Image_Loader_v2.0.0.5” zip file on pc & Run the “QFIL.exe” Setup.
  3. QFIL flash tool will launch on your pc or laptop.
  4. Now click on “Browse” button and browse the Lenovo K6 power stock ROM >> Open “SW” folder and select .mbn file.
  5. Again click on “Load XML” button and browse the xml file as shown in below screenshot.
  6. OK now, come to your device and power it off first. Then Press & hold volume Up + Down key + connect device with pc via USB cable at the same time.
  7. Driver installation will start automatically. So wait for installation.
  8. In the last, click on “Download” button and flashing process will start on your device. Here it may take 30-50 minutes to flash Lenovo k6 power mobile. Just wait to finish the process.

All Done!!! You have successfully flashed Lenovo K6 Power on Marshmallow version and now can remove it from PC.

You'll find this interesting: How To Root Lenovo K6 Power Without PC

Thus, you can flash Lenovo k6 power marshmallow the version easily. After flashing stock ROM you can upgrade it on Nougat stock ROM again via OTA update. This Lenovo K6 power flashing process is 100% working and tested process and you can use QFIL flash tool to flash any Qualcomm chipset devices.

If you're stuck anywhere, let me know in the comments below. I'll see y'all in the next post.